The indexing disc is a machine tool accessory that holds the workpiece on the chuck or between two tips and makes it rotate, index and position. Here are the precautions for using the indexing disc: 1. To use the solenoid valve, you need to know: loosen the lock. Use the - 2D2 solenoid valve CV02 integral check valve to rotate and return. Use the - 3C4 solenoid valve PCV02W integral check valve 2. Program writing: When writing the program, when the oil pressure unit is turned on, it is locked for 5 seconds, and the return status is executed in turn, When locking as MANUAL, the procedure of the indexing plate shall be written as follows: (1) release, locking itself is a 2-position solenoid valve (2) rotation, and write a single step completion action for return (3) rotation, and write a jog action for return for easy adjustment (4) When writing a continuous action, there should be a certain delay action to prevent loosening - rotating - locking - returning without reaching the position.
The above content is a detailed explanation of what should be paid attention to when using the indexing wheel. I believe you have further learned and understood. If you want to know more, please continue to follow us.